1·Within 15 minutes I had some nice molten aluminum.
在15分钟内我有一些不错的熔化铝。
2·As molten aluminum is covered with salt, evaporation and oxidation losses are minimized.
铝上有熔盐复盖，蒸发和氧化均较小，故铝的损耗亦小。
3·Avoid immersing these probes in molten aluminum. Doing so may result in corrosion of the sheathed sensor.
请不要将测温探头浸入溶化的铝水中，这样做会腐蚀测温探头的外壳。
4·This product is mainly used to adjust composition of molten aluminum a traditional product, containing 10% zirconium.
本产品是主要用来调整铝熔体成份的一种传统产品，含锆10%。
5·Here's a look at a crucible of molten aluminum, the crucible is almost full and I'll be pouring some ingots with this.
下面是在熔化铝坩埚的外观，坩埚几乎是全面和我将用这来浇锭。
6·The sessile drop technique is used to measure the contact Angle between molten aluminum and graphite or copper coated graphite.
采用改进的座滴法分别测定了铝熔体与石墨、镀铜石墨的接触角。
7·On this basis, single bubble formation during the foaming process of molten aluminum is analyzed and the bubble size is estimated.
在此基础上，分析泡沫铝制取过程中单个气泡的产生，并估算气泡尺寸。
8·The higher the pouring temperature or the larger the sprue hollow area rate is, the faster the filling velocity of molten aluminum is.
浇注温度越高、直浇道空心面积率越大，铝液充型速度越快。
9·The molten aluminum alloy cools from the bottom of the investment casting shell upwardly to uniformly and quickly cool the aluminum alloy.
熔 融铝合金从熔模铸造型壳的底部向上冷却，以便均匀地和快速地冷却 铝合金。
10·The on-line testing of hydrogen content in the molten aluminum alloy is very important for producing aluminum alloy castings of high quality.
液态铝合金含氢量现场检测对于生产高质量铝合金铸件及铸锭具有非常重要的意义。